Last week I finished the Lath Console Table I was commissioned to build by a very important client (my dad). Similar to the Lather’s table I built for the Salvations Design Competition earlier this year, the project relied heavily on salvaged materials and the slow process of lamination (gluing wood together). The client (pops) wanted me to do a little write up explaining the process of making the table as well as the story behind its inception and parts, so if you are interested in reading that, it is below the pictures. Overall, I like this table better than the first one I built, though they are a completely different design so direct comparison is difficult. With this one, i used the skinny part of the wood as the table top surface instead of the fat (how’s that for proper woodworking terminology!) and I really dig the bowling lane/hardwood floor effect it achieves. I came up with the general design idea for this table while I was building the last one, and after building this one, i’ve got six more designs i’d like to try, all relying on lath. Oh to have all the free time in the world to build furniture… Anyway, here are the pics. Let me know what you think or if you have any ideas for other ways to use lath strips, i’d love to hear them. P.S. – The first lath table I built is featured in the Reader’s Gallery of the current issue (Sept/Oct) of Fine Woodworking Magazine, page 77 I think. Checkitout!
“The Lath Console Table”
John Robert Portman 2011
Laths are long slender pieces of wood that are nailed horizontally between the studs of a house leaving narrow gaps in between strips so that the plaster of the walls and ceiling have something to adhere to when applied. Lath and plaster work is a specialized building trade that is very labor intensive and requires considerable skill. Since the invention of gypsum board, which is faster and cheaper to install than plaster, the use of lath and plaster in residential construction is very rare, even though its durability and quality is far greater than that of drywall.
As New Orleans is an old city, most of its houses were originally built with lath and plaster walls. Since Katrina, the first thing a renovator does to a flooded home is to gut out all of the plaster and lath and discard it in a dumpster. Because plaster is water resistant, the wooden lath behind the plaster is still in nearly the same condition as when it was installed, and thereby still usable. A standard gutted shotgun house yields hundreds of wood lath strips. This table is made from approximately 100 laths that have been fished out of dumpsters from all over New Orleans and re-purposed into a one-of-a-kind piece of furnitiure.
Built using traditional joinery, there are no nails or screws or fasteners of any kind holding the table together, only wood-to-wood connections. The top is made by process of lamination, in which each individual strip is planed smooth and glued to another strip and another and so on. The table top is connected to the legs via a through-wedged dovetail mortise and tenon joint, in which wedges are driven into slots cut into the end of the tenon. The wedges expand the tenon within a trapezoidal-shaped mortise, thereby locking the tenon in place permanently (which is why this is also called a “suicide” joint).
The lath shelf underneath is connected to the legs by a square peg running though the legs and into a square hole chiseled into the shelf. Even the pegs are made out of lathing strips. The only non-lath part of the table are the legs, which are made of light-colored cypress in order to contrast the rich dark browns of the pine lath.